恭喜您提交成功
提交失敗
AT91SO100
High-performance ARM MCU for IoT devices
品質保證
品質保證
從我們的供應鍊網路採購的所有零件都經過嚴格的進貨檢驗流程。 這種細緻的檢查可確保客戶收到的零件是正品並符合要求的標準。 此外，我們還保存這些檢查的詳細記錄，以確保整個供應鏈的透明度和可追溯性。
認證
我們已成功獲得各項認證標準，並建立了自己的專業檢測實驗室。 這確保了我們向客戶提供的每件產品都符合最高的品質標準。 我們遵守嚴格的測試協議，以保持我們產品的一致性和準確性。 為了確保我們的產品是原裝正品，我們還與信譽良好的第三方檢測機構合作進行嚴格的品質測試。 我們對品質的承諾延伸到滿足行業、法律、監管和 ISO 9001:2015 的要求。
運輸與付款
運輸與付款
關於運送
我們通常會在幾個工作日內通過可靠的運輸公司（例如 FedEx、SF、UPS 或 DHL）運送訂單。 我們還支持其他運輸方式。 如果您想詢問具體的運輸細節或費用，請隨時與我們聯繫。
關於付款
我們接受多種支付方式，包括VISA、MasterCard、銀聯、西聯、PayPal等渠道。
如果您有特定的付款方式或想詢問費率和其他詳細信息，請隨時與我們聯繫。
電匯
Paypal
信用卡
西聯匯款
速匯金
服務與包裝
服務與包裝
About After Sales Service
All Parts Extended Quality Guarantee
自發貨之日起 90 天內發起申請。
與我們的工作人員確認退貨或換貨。
保持貨物收到時的原始狀態。
最後請注意，退貨或換貨的資格取決於對退貨商品實際狀況的評估。 在完成退貨或換貨流程之前，我們將評估收到的貨物。 如果您對退貨或換貨有任何疑問或需要進一步幫助，請隨時通過以下方式聯絡我們： [email protected]
關於包裝
在包裝方面，我們的產品均精心包裝在防靜電袋中，以提供ESD防靜電保護。 外包裝堅固耐用且閉合牢固。 我們支持各種包裝方法，例如捲帶式、切帶式、管式或託盤式。
例子
捲帶式
剪膠帶
管或託盤
AT91SO100 數據表
目前的價格方案正在編制中。請聯絡我們的客戶服務團隊獲取最新的價格資訊。感謝您的理解和支援!
詳細說明
The ARM926EJ-S based SAM9G45 features the frequently demanded combination of user interface functionality and high data rate connectivity, including LCD Controller, resistive touch-screen, camera interface, audio, Ethernet 10/100 and high speed USB and SDIO. With the processor running at 400 MHz and multiple 100+ Mbps data rate peripherals, the SAM9G45 has the performance and bandwidth to the network or local storage media to provide an adequate user experience.Features• 400 MHz ARM926EJ-S™ ARM® Thumb® Processor – 32 Kbytes Data Cache, 32 Kbytes Instruction Cache, MMU• Memories – DDR2 Controller 4-bank DDR2/LPDDR, SDRAM/LPSDR – External Bus Interface supporting 4-bank DDR2/LPDDR, SDRAM/LPSDR, Static Memories, CompactFlash, SLC NAND Flash with ECC – One 64-Kbyte internal SRAM, single-cycle access at system speed or processor speed through TCM interface – One 64-Kbyte internal ROM, embedding bootstrap routine• Peripherals – LCD Controller supporting STN and TFT displays up to 1280*860 – ITU-R BT. 601/656 Image Sensor Interface – USB Device High Speed, USB Host High Speed and USB Host Full Speed with On-Chip Transceiver – 10/100 Mbps Ethernet MAC Controller – Two High Speed Memory Card Hosts (SDIO, SDCard, MMC) – AC97 controller – Two Master/Slave Serial Peripheral Interfaces – Two Three-channel 16-bit Timer/Counters – Two Synchronous Serial Controllers (I2S mode) – Four-channel 16-bit PWM Controller – Two Two-wire Interfaces – Four USARTs with ISO7816, IrDA, Manchester and SPI modes – 8-channel 10-bit ADC with 4-wire Touch Screen support – Write Protected Registers• System – 133 MHz twelve 32-bit layer AHB Bus Matrix – 37 DMA Channels – Boot from NAND Flash, SDCard, DataFlash® or serial DataFlash – Reset Controller with on-chip Power-on Reset – Selectable 32768 Hz Low-power and 12 MHz Crystal Oscillators – Internal Low-power 32 kHz RC Oscillator – One PLL for the system and one 480 MHz PLL optimized for USB High Speed – Two Programmable External Clock Signals – Advanced Interrupt Controller and Debug Unit – Periodic Interval Timer, Watchdog Timer, Real Time Timer and Real Time Clock• I/O – Five 32-bit Parallel Input/Output Controllers – 160 Programmable I/O Lines Multiplexed with up to Two Peripheral I/Os with Schmitt trigger input• Package – 324-ball TFBGA, pitch 0.8 mm
主要特徵
- 400 MHz ARM926EJ-S™ ARM® Thumb® Processor
- – 32 Kbytes Data Cache, 32 Kbytes Instruction Cache, MMU
- Memories
- – DDR2 Controller 4-bank DDR2/LPDDR, SDRAM/LPSDR
- – External Bus Interface supporting 4-bank DDR2/LPDDR, SDRAM/LPSDR, Static Memories, CompactFlash, SLC NAND Flash with ECC
- – One 64-Kbyte internal SRAM, single-cycle access at system speed or processor speed through TCM interface
- – One 64-Kbyte internal ROM, embedding bootstrap routine
- Peripherals
- – LCD Controller supporting STN and TFT displays up to 1280860
- – ITU-R BT. 601/656 Image Sensor Interface
- – USB Device High Speed, USB Host High Speed and USB Host Full Speed with On-Chip Transceiver
- – 10/100 Mbps Ethernet MAC Controller
- – Two High Speed Memory Card Hosts (SDIO, SDCard, MMC)
- – AC97 controller
- – Two Master/Slave Serial Peripheral Interfaces
- – Two Three-channel 16-bit Timer/Counters
- – Two Synchronous Serial Controllers (I2S mode)
- – Four-channel 16-bit PWM Controller
- – Two Two-wire Interfaces
- – Four USARTs with ISO7816, IrDA, Manchester and SPI modes
- – 8-channel 10-bit ADC with 4-wire Touch Screen support
- – Write Protected Registers
- System
- – 133 MHz twelve 32-bit layer AHB Bus Matrix
- – 37 DMA Channels
- – Boot from NAND Flash, SDCard, DataFlash® or serial DataFlash
- – Reset Controller with on-chip Power-on Reset
- – Selectable 32768 Hz Low-power and 12 MHz Crystal Oscillators
- – Internal Low-power 32 kHz RC Oscillator
- – One PLL for the system and one 480 MHz PLL optimized for USB High Speed
- – Two Programmable External Clock Signals
- – Advanced Interrupt Controller and Debug Unit
- – Periodic Interval Timer, Watchdog Timer, Real Time Timer and Real Time Clock
- – Five 32-bit Parallel Input/Output Controllers
- – 160 Programmable I/O Lines Multiplexed with up to Two Peripheral I/Os with Schmitt trigger input
- Package
- – 324-ball TFBGA, pitch 0.8 mm
規格
以下是所選零件的基本參數，涉及零件的特性及其所屬類別。
| Part Life Cycle Code | Active | Reach Compliance Code | compliant |
| ECCN Code | 3A991.A.2 | HTS Code ! | 8542.31.00.01 |
| Has ADC | NO | Address Bus Width ! | 24 |
| Bit Size | 32 | Boundary Scan | NO |
| CPU Family | SC100 | Clock Frequency-Max | 50 MHz |
| DAC Channels | NO | DMA Channels | NO |
| External Data Bus Width | 16 | Format | FIXED POINT |
| Integrated Cache | YES | JESD-30 Code | S-PBGA-B256 |
| Length | 15 mm | Low Power Mode | YES |
| Number of I/O Lines | 40 | Number of Serial I/Os | 2 |
| Number of Terminals | 256 | Number of Timers | 2 |
| On Chip Data RAM Width | 8 | On Chip Program ROM Width | 8 |
| PWM Channels | NO | Package Body Material | PLASTIC/EPOXY |
| Package Code | LFBGA | Package Equivalence Code | BGA256,17X17,32 |
| Package Shape | SQUARE | Package Style | GRID ARRAY, LOW PROFILE, FINE PITCH |
| RAM (bytes) | 102400 | ROM (words) | 262144 |
| ROM Programmability | EEPROM | Seated Height-Max | 1.25 mm |
| Supply Voltage-Max | 3.63 V | Supply Voltage-Min | 2.97 V |
| Supply Voltage-Nom | 3.3 V | Surface Mount ! | YES |
| Technology | CMOS | Terminal Form ! | BALL |
| Terminal Pitch ! | 0.8 mm | Terminal Position | BOTTOM |
| Width | 15 mm | uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Product Category ! | ARM Microcontrollers - MCU | Series | 91S |
| Mounting Style | SMD/SMT | Package / Case | BGA-256 |
| Core | ARM SC100 | Program Memory Size | 256 kB |
| Data Bus Width | 32 bit | ADC Resolution | No ADC |
| Maximum Clock Frequency | 50 MHz | Number of I/Os | 40 I/O |
| Data RAM Size | 96 kB | Supply Voltage - Min | 2.97 V |
| Supply Voltage - Max | 3.63 V | Minimum Operating Temperature | 0 C |
| Maximum Operating Temperature ! | + 70 C | Brand | Microchip Technology / Atmel |
| Height | 0.53 mm | Interface Type | SPI, UART, USB |
| Number of Timers/Counters | 3 Timer | Product Type ! | ARM Microcontrollers - MCU |
| Program Memory Type ! | EPROM | Subcategory | Microcontrollers - MCU |
| Unit Weight | 0.098203 oz |
數據表 PDF
數據表記錄了器件的特性、絕對最大額定值、應用等，這對於作為器件特定應用的整體指南大有裨益。
推薦零件
-
![ATSAMDA1J16A-ABT]()
7,621 有存貨
貨物週期: 3~7 天
最小訂購量為 1
-
![AT91SAM7S128-AU]()
AT91SAM7S128-AU product overview for ARM Microcontrollers - MCU
製造商: Microchip 包裝/箱: LQFP-64
4,190 有存貨
貨物週期: 3~7 天
最小訂購量為 1
